servFaces Textile Fortis, Strong & Ultima
These water-repellent and heavy-duty coatings effectively protect many types of textiles from water, dirt and stains. The coatings are transparent, non-visible and breathable and have a long service life.
The products do not affect the textile appearance, breathability, colour or feel and the coating provides an easy-to-maintain surface. Stains can be easily removed from the treated textile. Neither chemical cleaning nor machine washing affect the protective coating. The service-life of the protective coating is approximately 12 to 20 washes at 30°C depending on the textile product.
– Permanent protection
– Resistant to chemical and environmental contaminants
– Maintain the value of the surfaces
– Easy-to-clean surface
– Food-safe in cured state
– The surface remains breathable
– Maintains material suppleness and softness
– Quick and easy to use (do-it-yourself)
– Resistant against cleaning agents
– Colourless and transparent product
– Free from Siloxane, Teflon, Wax, Silicone and Fluorocarbon
– Resistant to UV-radiation
– No carcinogenic additives
– Free of Polyurethane
– Free of Nano-Wax
– Abrasion resistant
The textile must be thoroughly cleaned and all impregnated contamination removed prior to the sealing process. servFaces Textile Cleaner is recommended for this important initial step of the process.
After the cleaning process the textile surface must be completely dry before applying the sealing product.
The textile surface must be completely wetted, thus forming a thin wet film on the textile surface. Gently massage the product into the textile and then dry.
A slight darkening of the textile can occur during the process but will subside during drying.
Textile materials can be treated using either a dipping or spraying process. Thus, an optimum result is possible with minimum product usage; the product usage depends on the absorption properties of the textile material to be treated.
The product will completely dry in normal atmospheric conditions. The drying time can be reduced through the use of other processes; consult your servFaces application specialists for more information.
Overtime the textile surface will require maintenance after the initial coating application. The product can be used to refresh the textile surface, so long as the textile surface is not too contaminated.
Usage: 80 to 150 ml / m² (depending on the textile type)
Curing Time: initial protection 1 to 2 hours at +20°C / complete protection approximately 6 – 8 hours depending on the material
Application Temperature: +10°C to +25°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C
Always protect the product from direct sunlight and frost.